Material Specifications (BNP)

Brown Parcel Paper, Permanent Adhesive

Product Code: BNP

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

Long fibre laid Kraft paper. Due to the raw material nature, there may be small variations in colour and look between batches.

2. Adhesive

Water based permanent acrylic adhesive. Good adhesion to wet surfaces at low temperatures. Especially designed for glass containers, with excellent resistance to immersion in water/ice. 

3. Release Liner / Backing

Supercalendered glassine paper, cream colour.

1. MD - Machine Direction
2. CD - Cross Direction

Additional Information

The research centre ISEGA has given the adhesive SH­6020 Plus approval according to the European requirements for indirect contact with foodstuffs and compliance with the rules of the Code of Federal Regulations, FDA, 21 CFR Ch.I (April 1, 2013 edition) 175.105 . According to the FDA regulations the adhesive must be separated from the foodstuffs by a functional barrier.

Uses & Application

Specifically designed for product labels of high added value bottled in glass (wine, liquors, champagne, oil, water, jar....). Light brown lined labels with a natural, ecological look.

Shelf Life

2 years, under storage conditions as defined by FINAT section 2.5 (20-25ºC, 40-50% RH)

Disclaimer

The technical specifications given in this document are general in nature and based on our knowledge, experience and the information and recommendation provided by the material manufacturer, for which reason the suitability of our products for the end use to which they are put cannot be always guaranteed. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. It is the buyer’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Flexi Labels cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.

Last Updated April 2024