Material Specifications (FPNP)

Fluorescent Pink Paper, Permanent Adhesive

Product Code: FPNP

Label Construction

A typical label consists of 3 components. 

A face material is supported by the liner with special adhesive in the middle

1. Face Material

Woodfree paper with fluorescent pink coating.

2. Adhesive

General purpose strong permanent. Acrylic water borne adhesive. Good adhesion to all normal substrate, including non-polar surfaces, films, and corrugated board. Good low temperature performance.

3. Release Liner / Backing

White woodfree kraft paper.

1. MD - Machine Direction
2. CD - Cross Direction

Uses & Application

Eye catching display labels for price marking, promotional use and stationary. Flexography, letterpress, offset. VIP printable with laser, copier and thermal transfer.

Shelf Life

4 years, under storage conditions as defined by FINAT section 2.5 (20ºC, 50% RH)

Disclaimer

The technical specifications given in this document are general in nature and based on our knowledge, experience and the information and recommendation provided by the material manufacturer, for which reason the suitability of our products for the end use to which they are put cannot be always guaranteed. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. It is the buyer’s responsibility to assess, test and ensure the suitability of each product for their end use through their own prior approval process; Flexi Labels cannot therefore be held responsible for unsuitable end use of its products. These technical product specifications supersede all previous editions. All information is subject to change without prior notice.

Last Updated April 2024